dmesg - AMD Phenom II X6 1100T
Linux version 4.9.3-gentoo (root@phenom1100t) (gcc version 4.9.4 (Gentoo 4.9.4 p1.0, pie-0.6.4) ) #1 SMP Fri Jan 13 08:20:54 CET 2017
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd812fff] usable
BIOS-e820: [mem 0x00000000bd813000-0x00000000bd863fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd864000-0x00000000bd86dfff] ACPI data
BIOS-e820: [mem 0x00000000bd86e000-0x00000000bd86efff] ACPI NVS
BIOS-e820: [mem 0x00000000bd86f000-0x00000000bdadafff] reserved
BIOS-e820: [mem 0x00000000bdadb000-0x00000000bdaebfff] ACPI NVS
BIOS-e820: [mem 0x00000000bdaec000-0x00000000bdb00fff] reserved
BIOS-e820: [mem 0x00000000bdb01000-0x00000000bdb02fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdb03000-0x00000000bdb0bfff] reserved
BIOS-e820: [mem 0x00000000bdb0c000-0x00000000bdb11fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdb12000-0x00000000bdb73fff] reserved
BIOS-e820: [mem 0x00000000bdb74000-0x00000000bdd76fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdd77000-0x00000000bdefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX, BIOS 1604 10/16/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CDFFF write-protect
CE000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BDF00000 mask FFFFFFF00000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbdf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbdf00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x0215d000, 0x0215dfff] PGTABLE
BRK [0x0215e000, 0x0215efff] PGTABLE
BRK [0x0215f000, 0x0215ffff] PGTABLE
BRK [0x02160000, 0x02160fff] PGTABLE
BRK [0x02161000, 0x02161fff] PGTABLE
BRK [0x02162000, 0x02162fff] PGTABLE
RAMDISK: [mem 0x37c18000-0x37e03fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD864068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD86CC40 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658)
ACPI: DSDT 0x00000000BD864150 008AEC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BDB0CF80 000040
ACPI: APIC 0x00000000BD86CD38 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD86CDD8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD86CE18 000038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 0x00000000BD86CEA8 00017A (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fff9000-0x23fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bd812fff]
node 0: [mem 0x00000000bdd77000-0x00000000bdefffff]
node 0: [mem 0x0000000100001000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2087223
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12071 pages used for memmap
DMA32 zone: 772508 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310719 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 2 hotplug CPUs
e820: [mem 0xbdf00000-0xfebfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88023fc00000 s101144 r8192 d29928 u262144
pcpu-alloc: s101144 r8192 d29928 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2054587
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 8130832K/8348892K available (8541K kernel code, 1453K rwdata, 3104K rodata, 1128K init, 824K bss, 218060K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:1032 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3311.210 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6622.42 BogoMIPS (lpj=3311210)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff82087000 - ffffffff8208e000)
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (39733.70 BogoMIPS)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
xor: measuring software checksum speed
kworker/u16:0 (40) used greatest stack depth: 14888 bytes left
prefetch64-sse: 16332.000 MB/sec
generic_sse: 15352.000 MB/sec
xor: using function: prefetch64-sse (16332.000 MB/sec)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
kworker/u16:0 (41) used greatest stack depth: 13984 bytes left
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [c000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
TOM2: 0000000240000000 aka 9216M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x240000000-0xfcffffffff]
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 4257 MB/s
raid6: sse2x1 xor() 4501 MB/s
raid6: sse2x2 gen() 6835 MB/s
raid6: sse2x2 xor() 7812 MB/s
raid6: sse2x4 gen() 7835 MB/s
raid6: sse2x4 xor() 3849 MB/s
raid6: using algorithm sse2x4 gen() 7835 MB/s
raid6: .... xor() 3849 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfd40b000-0xfd40b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfd40a000-0xfd40afff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfd409000-0xfd4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfd408000-0xfd408fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfd407000-0xfd4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfd400000-0xfd403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfd406000-0xfd406fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfd405000-0xfd405fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfd404000-0xfd4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:05e3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd300000-0xfd307fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfd200000-0xfd207fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:04:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:07.0: reg 0x10: [mem 0xfd100000-0xfd1007ff]
pci 0000:04:07.0: reg 0x14: [io 0xd000-0xd07f]
pci 0000:04:07.0: supports D2
pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd813000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfd300000-0xfd3fffff]
pci_bus 0000:03: resource 1 [mem 0xfd200000-0xfd2fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1968K (ffff880037c18000 - ffff880037e04000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9813000-0xbd813000] (64MB) mapped at [ffff8800b9813000-ffff8800bd812fff]
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1484310475.726:1): initialized
workingset: timestamp_bits=56 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90001800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfd40b000 port 0xfd40b380 irq 19
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
sky2: driver version 1.30
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c85000, 14:da:e9:29:9d:e0, XID 0c900800 IRQ 26
r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfd409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.3-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
random: fast init done
ehci-pci 0000:00:13.2: irq 21, io mem 0xfd407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ata5: SATA link down (SStatus 0 SControl 300)
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.3-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfd404000
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.3-gentoo ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfd40a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.9.3-gentoo ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfd408000
firewire_core 0000:04:07.0: created device fw0: GUID 001fc60000163b76, S400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.9.3-gentoo ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfd406000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.9.3-gentoo ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfd405000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.9.3-gentoo ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.9.3-gentoo xhci-hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.9.3-gentoo xhci-hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.9.3-gentoo xhci-hcd
usb usb10: SerialNumber: 0000:03:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.9.3-gentoo xhci-hcd
usb usb11: SerialNumber: 0000:03:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver trancevibrator
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Marvell M88ALP01 'CAFE' Camera Controller version 2
saa7146: register extension 'av7110'
Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
cx25821: driver version 0.0.106 loaded
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Front Mic=0x19
snd_hda_codec_generic hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_generic hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Btrfs loaded, crc32c=crc32c-generic
BTRFS: selftest: sectorsize: 4096 nodesize: 4096
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Running space stealing from bitmap to extent
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running extent I/O tests
BTRFS: selftest: Running find delalloc tests
usb 4-4: new full-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 3311.099 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fba416af79, max_idle_ns: 440795365917 ns
BTRFS: selftest: Running extent buffer bitmap tests
usb 5-2: new low-speed USB device number 2 using ohci-pci
BTRFS: selftest: Extent I/O tests finished
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
BTRFS: selftest: Running outstanding_extents tests
BTRFS: selftest: Running qgroup tests
BTRFS: selftest: Qgroup basic add
BTRFS: selftest: Qgroup multiple refs test
BTRFS: selftest: Running free space tree tests
BTRFS: selftest: sectorsize: 4096 nodesize: 8192
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Running space stealing from bitmap to extent
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running extent I/O tests
BTRFS: selftest: Running find delalloc tests
BTRFS: selftest: Running extent buffer bitmap tests
BTRFS: selftest: Extent I/O tests finished
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
BTRFS: selftest: Running outstanding_extents tests
BTRFS: selftest: Running qgroup tests
BTRFS: selftest: Qgroup basic add
BTRFS: selftest: Qgroup multiple refs test
BTRFS: selftest: Running free space tree tests
BTRFS: selftest: sectorsize: 4096 nodesize: 16384
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Running space stealing from bitmap to extent
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running extent I/O tests
BTRFS: selftest: Running find delalloc tests
usb 7-1: new low-speed USB device number 2 using ohci-pci
usb 4-4: New USB device found, idVendor=28de, idProduct=1142
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: Steam Controller
usb 4-4: Manufacturer: Valve Software
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:28DE:1142.0001/input/input13
BTRFS: selftest: Running extent buffer bitmap tests
usb 5-2: New USB device found, idVendor=04d9, idProduct=1603
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB Keyboard
usb 5-2: Manufacturer:
input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:04D9:1603.0002/input/input14
BTRFS: selftest: Extent I/O tests finished
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
BTRFS: selftest: Running outstanding_extents tests
BTRFS: selftest: Running qgroup tests
BTRFS: selftest: Qgroup basic add
BTRFS: selftest: Qgroup multiple refs test
BTRFS: selftest: Running free space tree tests
hid-generic 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:12.0-4/input0
hid-generic 0003:28DE:1142.0003: hiddev0,hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:12.0-4/input1
BTRFS: selftest: sectorsize: 4096 nodesize: 32768
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Running space stealing from bitmap to extent
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running extent I/O tests
BTRFS: selftest: Running find delalloc tests
hid-generic 0003:28DE:1142.0004: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:12.0-4/input2
hid-generic 0003:28DE:1142.0005: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:12.0-4/input3
hid-generic 0003:28DE:1142.0006: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:12.0-4/input4
hid-generic 0003:04D9:1603.0002: input,hidraw5: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.0-2/input0
BTRFS: selftest: Running extent buffer bitmap tests
input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/0003:04D9:1603.0007/input/input15
usb 7-1: New USB device found, idVendor=046d, idProduct=c050
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB-PS/2 Optical Mouse
usb 7-1: Manufacturer: Logitech
BTRFS: selftest: Extent I/O tests finished
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
BTRFS: selftest: Running outstanding_extents tests
BTRFS: selftest: Running qgroup tests
BTRFS: selftest: Qgroup basic add
BTRFS: selftest: Qgroup multiple refs test
BTRFS: selftest: Running free space tree tests
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/0003:046D:C050.0008/input/input16
BTRFS: selftest: sectorsize: 4096 nodesize: 65536
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Running space stealing from bitmap to extent
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running extent I/O tests
BTRFS: selftest: Running find delalloc tests
hid-generic 0003:04D9:1603.0007: input,hidraw6: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.0-2/input1
hid-generic 0003:046D:C050.0008: input,hidraw7: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:16.0-1/input0
BTRFS: selftest: Running extent buffer bitmap tests
BTRFS: selftest: Extent I/O tests finished
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
BTRFS: selftest: Running outstanding_extents tests
BTRFS: selftest: Running qgroup tests
BTRFS: selftest: Qgroup basic add
BTRFS: selftest: Qgroup multiple refs test
BTRFS: selftest: Running free space tree tests
clocksource: Switched to clocksource tsc
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-7: Maxtor 6B250S0, BANC1B10, max UDMA/133
ata6.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata3.00: ATA-7: Maxtor 6B250S0, BANC1980, max UDMA/133
ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: LPM support broken, forcing max_power
ata2.00: ATA-6: WDC WD1200JD-00FYB0, 02.05D02, max UDMA/100
ata2.00: 234441648 sectors, multi 16: LBA48
ata2.00: applying bridge limits
ata6.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata2.00: LPM support broken, forcing max_power
ata2.00: configured for UDMA/100
ata4.00: ATA-8: TOSHIBA MQ01ABB200, AY000U, max UDMA/100
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3320620AS E PQ: 0 ANSI: 5
console [netcon0] enabled
netconsole: network logging started
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD1200JD-00F 5D02 PQ: 0 ANSI: 5
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ALSA device list:
#0: HDA ATI SB at 0xfd400000 irq 16
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: Direct-Access ATA Maxtor 6B250S0 1980 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/234 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: Direct-Access ATA TOSHIBA MQ01ABB2 0U PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:0: Direct-Access ATA Maxtor 6B250S0 1B10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sde] 490234752 512-byte logical blocks: (251 GB/234 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
Freeing unused kernel memory: 1128K (ffffffff81f6d000 - ffffffff82087000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1684K (ffff88000185b000 - ffff880001a00000)
Freeing unused kernel memory: 992K (ffff880001d08000 - ffff880001e00000)
random: crng init done
systemd-udevd (2393) used greatest stack depth: 13968 bytes left
fuse init (API version 7.26)
findfs (3625) used greatest stack depth: 13952 bytes left
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
mountpoint (3645) used greatest stack depth: 13440 bytes left
systemd[1]: systemd 226 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-g (3677) used greatest stack depth: 13200 bytes left
systemd[1]: gssproxy.service: Cannot add dependency job, ignoring: Unit gssproxy.service failed to load: No such file or directory.
systemd[1]: rpc-gssd.service: Cannot add dependency job, ignoring: Unit rpc-gssd.service failed to load: No such file or directory.
systemd[1]: rpc-svcgssd.service: Cannot add dependency job, ignoring: Unit rpc-svcgssd.service failed to load: No such file or directory.
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
it87: Found IT8721F chip at 0x290, revision 1
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 6 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3311101409 Hz
supdrvMeasureTscDeltaOne failed. rc=-3743 CPU[0].idCpu=3 Master[2].idCpu=0
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: pci-stub module not available, cannot detach PCI devices
vboxpci: IOMMU not found (not registered)
EXT4-fs (sdd1): re-mounted. Opts: (null)
systemd-journald[3693]: Received request to flush runtime journal from PID 1
Adding 8388604k swap on /swap/swap. Priority:-1 extents:177 across:16900092k
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.101 Thu Dec 1 15:52:31 PST 2016
expr (4836) used greatest stack depth: 12960 bytes left
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
i2c i2c-2: SMBus Timeout!
i2c i2c-2: Failed reset at end of transaction (01)
i2c i2c-2: Failed! (01)
i2c i2c-2: Failed! (01)
i2c i2c-3: Failed! (01)
i2c i2c-3: Failed! (01)
i2c i2c-3: Failed! (01)
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81f14940)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0 eth0: link down
r8169 0000:06:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-journald[3693]: Failed to read ACL on /var/log/journal/1363c53af4d933ab7ab55c260000000d/user-1001.journal, ignoring: Operation not supported
kworker/dying (1335) used greatest stack depth: 12184 bytes left
mount.nfs (6824) used greatest stack depth: 11136 bytes left
nfs: server kabini1 not responding, still trying
nfs: server kabini1 OK
upowerd[5023]: segfault at 20 ip 00007f1647ffcb80 sp 00007ffc78b88968 error 4 in libglib-2.0.so.0.4800.2[7f1647f75000+112000]
upowerd[24739]: segfault at 20 ip 00007f7b08233b80 sp 00007ffef3ad4a78 error 4 in libglib-2.0.so.0.4800.2[7f7b081ac000+112000]
upowerd[25387]: segfault at 20 ip 00007fcfb7b74b80 sp 00007fffc5144398 error 4 in libglib-2.0.so.0.4800.2[7fcfb7aed000+112000]
upowerd[26288]: segfault at 20 ip 00007f712506fb80 sp 00007ffdce59d218 error 4 in libglib-2.0.so.0.4800.2[7f7124fe8000+112000]
CE: hpet increased min_delta_ns to 20115 nsec
ata2: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
ata2: irq_stat 0x00400000, PHY RDY changed
ata2: SError: { Persist PHYRdyChg 10B8B }
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: LPM support broken, forcing max_power
ata2.00: LPM support broken, forcing max_power
ata2.00: configured for UDMA/100
ata2: EH complete
mount.nfs (11526) used greatest stack depth: 11040 bytes left
upowerd[27006]: segfault at 20 ip 00007f4bba95bb80 sp 00007fff7389ff08 error 4 in libglib-2.0.so.0.4800.2[7f4bba8d4000+112000]